scsi disk 삭제 방법

rhel 기준이며 잘안될때는 재기동이 짱입니다 ㅠㅠ

Procedure 1. Ensuring a Clean Device Removal

Close all users of the device and backup device data as needed.

Use umount to unmount any file systems that mounted the device.

Remove the device from any md and LVM volume using it. If the device is a member of an LVM Volume group, then it may be necessary to move data off the device using the pvmove command, then use the vgreducecommand to remove the physical volume, and (optionally) pvremove to remove the LVM metadata from the disk.

If the device uses multipathing, run multipath -l and note all the paths to the device. Afterwards, remove the multipathed device using multipath -f device.

Run blockdev –flushbufs device to flush any outstanding I/O to all paths to the device. This is particularly important for raw devices, where there is no umount or vgreduce operation to cause an I/O flush.

Remove any reference to the device's path-based name, like /dev/sd, /dev/disk/by-path or the major:minor number, in applications, scripts, or utilities on the system. This is important in ensuring that different devices added in the future will not be mistaken for the current device.

Finally, remove each path to the device from the SCSI subsystem. To do so, use the command echo 1 > /sys/block/device-name/device/delete where device-name may be sde, for example.

Another variation of this operation is echo 1 > /sys/class/scsi_device/h:c:t:l/device/delete, where h is the HBA number, c is the channel on the HBA, t is the SCSI target ID, and l is the LUN.